Insert 명령을 실행하고 Sql에 삽입 된 Id 반환

Insert 명령을 실행하고 Sql에 삽입 된 Id 반환

---

안녕하세요, MVC4에서 C #을 사용하여 SQL 테이블에 일부 값을 삽입하고 있습니다. 실제로 값을 삽입하고 마지막으로 삽입 된 레코드의 'ID'를 반환하고 싶습니다. 다음 코드를 사용합니다.

public class MemberBasicData
{
    public int Id { get; set; }
    public string Mem_NA { get; set; }
    public string Mem_Occ { get; set; }     
}

ID는 삽입시 데이터베이스에서 자동으로 증가합니다.

public int CreateNewMember(string Mem_NA, string Mem_Occ )
{
    using (SqlConnection con=new SqlConnection(Config.ConnectionString))
    {
        using(SqlCommand cmd=new SqlCommand("INSERT INTO Mem_Basic(Mem_Na,Mem_Occ) VALUES(@na,@occ)",con))
        {
            cmd.Parameters.AddWithValue("@na", Mem_NA);
            cmd.Parameters.AddWithValue("@occ", Mem_Occ);
            con.Open();

            int modified = cmd.ExecuteNonQuery();

            if (con.State == System.Data.ConnectionState.Open) con.Close();
                return modified;
        }
    }
}

나는 ExecuteNonQuery행에 영향을 미치는 숫자를 나타냅니다. 그 대신에

int modified = (int)cmd.ExecuteScalar();

하지만 작동하지 않습니다. 이 문제를 해결하도록 도와주세요. 그리고 cmd.ExecuteInsertAndGetID () (내 코드와 함께 작동하지 않음)와 같은 코드가 있습니까?

---

다음 솔루션은 SQL Server 2005 이상에서 작동합니다. 출력 을 사용 하여 필수 필드를 가져올 수 있습니다 . ID 대신 반환하려는 키를 작성할 수 있습니다. 이렇게 해

SQL SERVER 2005 이상

    using(SqlCommand cmd=new SqlCommand("INSERT INTO Mem_Basic(Mem_Na,Mem_Occ) output INSERTED.ID VALUES(@na,@occ)",con))
    {
        cmd.Parameters.AddWithValue("@na", Mem_NA);
        cmd.Parameters.AddWithValue("@occ", Mem_Occ);
        con.Open();

        int modified =(int)cmd.ExecuteScalar();

        if (con.State == System.Data.ConnectionState.Open) 
            con.Close();

        return modified;
    }
}

이전 버전

    using(SqlCommand cmd=new SqlCommand("INSERT INTO Mem_Basic(Mem_Na,Mem_Occ)  VALUES(@na,@occ);SELECT SCOPE_IDENTITY();",con))
    {
        cmd.Parameters.AddWithValue("@na", Mem_NA);
        cmd.Parameters.AddWithValue("@occ", Mem_Occ);
        con.Open();

        int modified = Convert.ToInt32(cmd.ExecuteScalar());

        if (con.State == System.Data.ConnectionState.Open) con.Close();
            return modified;
    }
}

---

쿼리를 다음으로 변경

"INSERT INTO Mem_Basic(Mem_Na,Mem_Occ) VALUES(@na,@occ); SELECT SCOPE_IDENTITY()"

이렇게하면 마지막으로 삽입 된 ID를 반환하여 얻을 수 있습니다. ExecuteScalar

---

SQL Server stored procedure:

CREATE PROCEDURE [dbo].[INS_MEM_BASIC]
    @na varchar(50),
    @occ varchar(50),
    @New_MEM_BASIC_ID int OUTPUT
AS
BEGIN
    SET NOCOUNT ON;

    INSERT INTO Mem_Basic
    VALUES (@na, @occ)

    SELECT @New_MEM_BASIC_ID = SCOPE_IDENTITY()
END

C# code:

public int CreateNewMember(string Mem_NA, string Mem_Occ )
{
    // values 0 --> -99 are SQL reserved.
    int new_MEM_BASIC_ID = -1971;   
    SqlConnection SQLconn = new SqlConnection(Config.ConnectionString);
    SqlCommand cmd = new SqlCommand("INS_MEM_BASIC", SQLconn);

    cmd.CommandType = CommandType.StoredProcedure;

    SqlParameter outPutVal = new SqlParameter("@New_MEM_BASIC_ID", SqlDbType.Int);

    outPutVal.Direction = ParameterDirection.Output;
    cmd.Parameters.Add(outPutVal);
    cmd.Parameters.Add("@na", SqlDbType.Int).Value = Mem_NA;
    cmd.Parameters.Add("@occ", SqlDbType.Int).Value = Mem_Occ;

    SQLconn.Open();
    cmd.ExecuteNonQuery();
    SQLconn.Close();

    if (outPutVal.Value != DBNull.Value) new_MEM_BASIC_ID = Convert.ToInt32(outPutVal.Value);
        return new_MEM_BASIC_ID;
}

I hope these will help to you ....

You can also use this if you want ...

public int CreateNewMember(string Mem_NA, string Mem_Occ )
{
    using (SqlConnection con=new SqlConnection(Config.ConnectionString))
    {
        int newID;
        var cmd = "INSERT INTO Mem_Basic(Mem_Na,Mem_Occ) VALUES(@na,@occ);SELECT CAST(scope_identity() AS int)";

        using(SqlCommand cmd=new SqlCommand(cmd, con))
        {
            cmd.Parameters.AddWithValue("@na", Mem_NA);
            cmd.Parameters.AddWithValue("@occ", Mem_Occ);

            con.Open();
            newID = (int)insertCommand.ExecuteScalar();

            if (con.State == System.Data.ConnectionState.Open) con.Close();
                return newID;
        }
    }
}

---

USE AdventureWorks2012;
GO
IF OBJECT_ID(N't6', N'U') IS NOT NULL 
    DROP TABLE t6;
GO
IF OBJECT_ID(N't7', N'U') IS NOT NULL 
    DROP TABLE t7;
GO
CREATE TABLE t6(id int IDENTITY);
CREATE TABLE t7(id int IDENTITY(100,1));
GO
CREATE TRIGGER t6ins ON t6 FOR INSERT 
AS
BEGIN
   INSERT t7 DEFAULT VALUES
END;
GO
--End of trigger definition

SELECT id FROM t6;
--IDs empty.

SELECT id FROM t7;
--ID is empty.

--Do the following in Session 1
INSERT t6 DEFAULT VALUES;
SELECT @@IDENTITY;
/*Returns the value 100. This was inserted by the trigger.*/

SELECT SCOPE_IDENTITY();
/* Returns the value 1. This was inserted by the 
INSERT statement two statements before this query.*/

SELECT IDENT_CURRENT('t7');
/* Returns value inserted into t7, that is in the trigger.*/

SELECT IDENT_CURRENT('t6');
/* Returns value inserted into t6. This was the INSERT statement four statements before this query.*/

-- Do the following in Session 2.
SELECT @@IDENTITY;
/* Returns NULL because there has been no INSERT action 
up to this point in this session.*/

SELECT SCOPE_IDENTITY();
/* Returns NULL because there has been no INSERT action 
up to this point in this scope in this session.*/

SELECT IDENT_CURRENT('t7');
/* Returns the last value inserted into t7.*/

---

using(SqlCommand cmd=new SqlCommand("INSERT INTO Mem_Basic(Mem_Na,Mem_Occ) " +
    "VALUES(@na,@occ);SELECT SCOPE_IDENTITY();",con))
{
    cmd.Parameters.AddWithValue("@na", Mem_NA);
    cmd.Parameters.AddWithValue("@occ", Mem_Occ);
    con.Open();

    int modified = cmd.ExecuteNonQuery();

    if (con.State == System.Data.ConnectionState.Open) con.Close();
        return modified;
}

SCOPE_IDENTITY : Returns the last identity value inserted into an identity column in the same scope. for more details http://technet.microsoft.com/en-us/library/ms190315.aspx

참고URL : https://stackoverflow.com/questions/18373461/execute-insert-command-and-return-inserted-id-in-sql